Setting up ISDN-networking is a complicated task. Read documentation
found in /usr/src/linux/Documentation/isdn.
isdn.o).
Load command:
/sbin/modprobe isdn.o
No module parameters.
Depends on slhc.o
icn.o).
Load command:
/sbin/modprobe icn.o [parameters]
portbase=p membase=m icn_id=idstring [icn_id2=idstring2]
p = portbase (default: 0x320)
m = shared memory (default: 0xd0000)
When using the ICN double card, you MUST define TWO idstrings.
idstring must start with a character!
Depends on isdn.o
pcbit.o).
Load command:
/sbin/modprobe pcbit.o
mem = 0 default = 0xd0000
irq = 0 default = 5
Depends on isdn.o
teles.o).
Load command:
/sbin/modprobe teles.o io=.....
io=m0,i0,p0,d0[,m1,i1,p1,d1 ... ,mn,in,pn,dn] teles_id=idstring
m0 = shared memory of 1st card. (default: 0xd0000
i0 = irq of 1st card. (default: 15)
p0 = portbase of 1st card. (default: 0xd80)
d0 = D-channel protocol of 1st card. 1=1TR6, 2=EDSS1 (default: 2)
p1,i1,m1,d1 = Parameters of second card (defaults: none)
pn,in,mn,d1 = Parameters of n'th card (up to 16 cards are supported)
idstring = Driver-Id for accessing with utilities and identification
when using a Line-monitor. (default: none) idstring must start with a character!
The type of the card is determined by the port, irq and shared memory:
port == 0, shared memory != 0 -> Teles S0-8
port != 0, shared memory != 0 -> Teles S0-16.0
port != 0, shared memory == 0 -> Teles S0-16.3
Depends on isdn.o